AUDIO INNOVATE INNOJUSTER CUT-IN CURVE CONTROL ADJUSTER

InnoJuster

Description:
The Innojuster is a small box which allows the user to control all of the Innofader adjustments when installed with the Innofader. Use the Innojuster with the Innofader to turn your cheap analog mixer into a pro mixer.
Get more adjusment flexibilty on any mixer by tapping into the Innofader's wide range of adjustments from outside the mixer Includes the following controls:


1) Cut-in: Allows adjustment of the dead space on each side of the crossfader. Adjustable from 0 to 10mm
2) Curve: Allows a full range of curve adjustments from bottom to top cut and everything in-between.
3) Fwd/Rev switch: Switches between normal and hamster style fader operation
4) X/Y: Switches between asymmetrical "Y" fader curves and left/right symmetrical "X" fader curves Mono VCA crossfaders (usually 3 pin) and analog crossfaders use "X" curves so crossfading action on both sides are identical Stereo VCA crossfaders (usually 4 pin) and line faders can use "Y" curves for a smooth output. With the switch, you can do some special customizations.
Example:
"Y" curve on a mono VCA crossfader can put a soft curve on CH1 and a hard curve on CH2
"X" curve on a stereo VCA crossfader can be used to do a CH1/CH2 switch in the center of the fader
5) Calibration: Allows recalibration of the Innofader on-the-spot without the need to open the mixer.
Compatible with all Innofader models


INNOJUSTER INstallations can be done at VST.


Manufacturer Part Number :
Out of stock contact Sales@vstservice.com for availability
Images
Click here to view larger image


Click here to view larger image

Price
MSRP: $0.00
Price: $40.00 

Shopping Cart Options
Options:
Out of stock contact Sales@vstservice.com for availability

Quantity:   




Vestax Black/Red EQ/Trim Rotary Knob D Shaft
Vestax Black/Red EQ/Trim Rotary Knob D Shaft
Vestax Black/Red EQ/Trim Rotary Knob. D-Shaft type
In stock

Single gray button  MPC1000, doesnt fit F key position. Replacement for Clear
Single gray button MPC1000, doesnt fit F key position. Replacement for Clear
Single gray button MPC1000, doesn't fit F key position. This is the cursor button. This can fit in the same area as the Clear button on the mpc 1000
Out of stock contact Sales@vstservice.com for availability

Akai MPC1000 MPC 1000 Red Rubber Pad
Akai MPC1000 MPC 1000 Red Rubber Pad
Akai MPC1000 MPC 1000 Red Rubber Pad
Out of stock contact Sales@vstservice.com for availability

Akai MPC1000 Push Button Clear MPC-1000 MPC 1000
Akai MPC1000 Push Button Clear MPC-1000 MPC 1000
Akai MPC1000 Push Button Clear MPC-1000 MPC 1000
In stock